VideoGuys Australia | RODE NTG2 Directional Condenser Mic.

Promotions/Clearance Items « All Categories « Shipping Charges & Policies « Holiday Closing Times « Customer Testimonials « Videoguys Events « Terms & Conditions «

RODE NTG2 Directional Condenser Mic.

Product Category:
Shotgun Microphones

Videoguys SKU#: RODE_NTG-2

Price: $365.00 inc GST

SRP : $475.00 inc GST

Save: $110.00

Quantity:

The new RODE NTG-2 is a lightweight condenser shotgunmicrophone, which has been specifically designed forprofessional applications within the film, video, television and production industries.

The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or48 V to the P48 standard.

A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directlyto video cameras or on boom poles. The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.

Features

• Broadcast sound quality.

• Rugged metal construction.

• Condenser microphone transducer.

• Weighing 161 grams approx. (5.17 oz.).

• Low noise circuitry.

• Low handling noise

.• Supplied with stand mount and zip pouch.

• Designed & manufactured in Australia

.• Full 2 year guarantee.

OperationPower

The NTG-2 is designed to operate from standard P48phantom power or a 1.5 V Alkaline Battery. The NTG-2will operate between 44 V to 52 V applied with positivepolarity to pin 2 and pin 3 via the output XLR connector.

Output Impedance

The NTG-2 will operate satisfactorily into a load impedanceas low as 1 k§Ù. If a load below this is used, the outputsignal level will be reduced.The NTG-2’s output is balanced between pin 2 (hot) andpin 3 (cold). Pin 1 is ground.

Specifications
Acoustic principle: Line plus Gradient.
Directional pattern: Super-Cardioid.
Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 250 Ω - phantom power, 350 Ω - battery power
Signal/Noise ratio DIN/IEC 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equivalent noise: 18 dB SPL (per IEC651, IEC268-15)
Maximum SPL: 131 dB (@ 1% THD into 1 kΩ)
Sensitivity at 1 kHz into 1 kΩ: -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit) Dynamic range - Amplifier DIN/IEC 651 113 dB (per IEC651, IEC268-15) Power (Supply voltage): 1.5 V Alkaline Battery or P48 Phantom
Current consumption: 2.0 mA Battery Life: >400 hours with fresh alkaline battery.
Output Connection: 3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)
Weight approx.: 161 g approx. (5 oz.)
Dimensions: 278mm(L)x22mm(W)

Select check box for items you want to add then -->


$48.00	Rode DeadCat Eliminates for High wind noise, suits Rode : VideoMic, NTG-1 & NTG-2. ...More Info	Qty:

$64.00	Azden SMH-1 Shotgun Accessory - Shock Mount Azden SMH-1 Shotgun Accessory - Shock Mount ...More Info	Qty:

$48.00	Rode SM5 Clamp Adaptor Shock Mount A shotgun microphone suspension shock mount for high end video cameras. The SM5 shock mount is designed specifically to fit Panasonic® and Sony® video cameras with clamp mounts. ie Sony Z1P/A1P or Panaosnic DVX100. ...More Info	Qty:

$48.00	Rode SM4 Stand Adaptor Shock Mount A shotgun microphone suspension shock mount with a stand mount adaptor. ...More Info	Qty:

$48.00	Rode SM3 Shock Mount Suspension Shock Mount - (Cold Shoe Adaptor). The SM3 is a shock mount designed to significantly reduce vibration transmission to all shotgun microphones. ...More Info	Qty:

Select check box for items you want to add then -->

$339.00	RODE NTG-1 Directional Condenser Mic. The new RODE NTG-1 is a lightweight condenser shotgun microphone,which has been specifically designed for professional applications withinthe film, video, television, voice-over and ENG industries. ...More Info

$169.00	RODE VideoMic The is a professional grade shotgun microphone. Based on the latest ¡®Film industry¡¯ technology, the is designed specifically for use with high quality Digital Video Cameras. ...More Info

Thank you for sharing your thoughts about one of our products!
Please focus on the product performance and quality.
Your review may be posted on Videoguys Australia Web Site once its been reviewed.

WRITE A REVIEW
This Item is not reviewed yet - Be the first to review this item!
Your Rating:	Stars (5=Best)
First Name:
Location:
Email Address:
Review Headline:
Your Review:

Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein. VIDEOGUYS - referenced herein is a registered trademark.