| Print Page | Close Window |
|
|||||
|
|||||
|
The Wendt X4 is a portable, compact 4-channel field mixer designed for audio mixing for film, documentaries, ENG or virtually any application requiring a portable mixer. The mixer features 4 XLR balanced microphone inputs with individually switched phantom power allowing an assortment of dynamic and condenser microphones to be used simultaneously. The Wendt X4 is a portable, compact 4-channel field mixer designed for audio mixing for film, documentaries, ENG or virtually any application requiring a portable mixer. The mixer features 4 XLR balanced microphone inputs with individually switched phantom power allowing an assortment of dynamic and condenser microphones to be used simultaneously. Each input features a rotary level control and the master level provides global level control over all inputs. In addition switchable gain / attenuation on every input provides 10dB, 20dB and 0dB of level gain for dynamic or condenser microphones. The output section features stereo XLR balanced outputs and a stereo 3.5mm microphone level output jack for feeding signal to camcorders or smaller portable recorders. The balanced XLR outputs are switchable between mic or line level signal. A limiter switch is also located at the output section. The limiter minimizes transient peaks and reduces distortion caused by signal overload. The X4 is powered with 8-AA Alkaline batteries for up to 15 hours and a 2.1mm center pin jack allows the mixer to be powered with an external 9-18VDC source. A multi-pin accessory connector allows multiple X4s to operate ganged or can be used for monitor returns or external power. Key Features • Flexible 4 Channel Configuration The Wendt X4 offers 4-channel remote mixing capability in a compact, rugged, portable unit. • Balanced Connections 4 balanced XLR microphone inputs provide low noise floor and high signal gain. 2 balanced XLR stereo outputs are switchable to send audio at either microphone or line level signal. • Input Attenuation All balanced microphone inputs feature 3-position attenuation switches, providing 0dB, 10dB and 20dB of attenuation. • Flexible Powering Options The mixer is powered via 8 x AA alkaline batteries for up to 15 hours. Provisions for external powering are also provided. • Slate Mic & Test Tone A Built in Slate Microphone and Test Tone Oscillator provides all the tools needed for meter and tape calibration. |
|||||
|
Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein. VIDEOGUYS - referenced herein is a registered trademark. © 2024 Videoguys Australia All |
|||||
