View CartManfrotto 577 Quick Release Adaptor w/501PL
-
-
-
-
- Tweet
Manfrotto 577 Quick Release Adaptor w/501PL - Compatible with the 501PL camera plated (supplied with the head 501, 503 and 505 Video Head) and the special 501PLONG accessory plate.
REVIEW SNAPSHOT®
by PowerReviews(based on 37 reviews)
Ratings Distribution
97%
of respondents would recommend this to a friend.
Pros
- Easy to use (31)
- Well built / quality (27)
- Lightweight (20)
- Interfaces well with camcorder (17)
- Improves performance (16)
Cons
Best Uses
- Shooting outdoors (17)
- Shooting indoors (15)
- Travel (11)
- Home movies (7)
- Upgrade (6)
- Reviewer Profile:
- Aspiring film maker (15), Tech savvy (13), Film professional (10)
- Was this a gift?:
- No (31)
Most Liked Positive Review
Manfrotto 577 Quick Release Adaptor
I bought this camera plate with the intention to mount it to a custom built tripod with suction cup feet that can be attached to any flat surface such as a car door, window,...Read complete review
I bought this camera plate with the intention to mount it to a custom built tripod with suction cup feet that can be attached to any flat surface such as a car door, window, table or even upside down. The fact that is has multiple mounting screws, with a large number of combinations, allows for easy installation to any of your existing hardware. It includes two different threaded mounting screws that will fit most small to medium camera's and video camera's. I am very pleased with the material that it is constructed form, very rugged but still quite light.
I would thoroughly recommend this to anyone looking for a quick release mounting plate.
VS
Most Liked Negative Review
Good but problematic
The quick release plate is a great idea, but it depends on what you are going to use it for.
I bought this to use with the Glidecam HD2000 but there are...Read complete review
The quick release plate is a great idea, but it depends on what you are going to use it for.
I bought this to use with the Glidecam HD2000 but there are several problems you have to overcome to make it work.
Firstly the glidecam plate that the base of this attaches to, does not have holes big enough or spaced probably apart to attach enough screws to hold the plate securely in place. To get around this you need to make one of the holes on the glidecam plate bigger.
Secondly when you put the base plate on the bottom of a camera (such as my GH4 or Blackmagic Pocket) the plates lock to keep the camera in placce often hits the bottom of the camera, making it impossobly to lock the camera on to the release plate. There are a couple of options to work aorund that, such as taking the spring out of the lock.
If you are happy to make work arounds for these issues, the plate is solidly constructed and does sit nicely on my glidecam now.
Reviewed by 37 customers
Displaying reviews 1-10
Previous | Next »
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Awesome QR adaptor. Perfect for attaching to my Miller tripod so I can quickly switch the camera to a Manfrotto monopod when needed on a shoot.
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Whacked this on my Zhiyun crane so I cold make quick adjustments when changing lenses.. It is ideal...
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Excellent product. Great service and quick delivery.
Pros
- Easy To Use
- Good Interface With Camcorder
- Improves Performance
- Lightweight
- Quality Construction
Cons
- Flimsy Design
Best Uses
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Only decent choice, quality is good, but design can be improved.
- Was this a gift?:
- No
Pros
- Easy To Use
- Good Interface With Camcorder
- Improves Performance
- Lightweight
- Quality Construction
Cons
Best Uses
- Shooting Indoors
- Shooting Outdoors
- Upgrade
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Awesome!! Enough said
- Was this a gift?:
- No
Pros
- easy of access
- Easy To Use
- Good Interface With Camcorder
- Lightweight
- Quality Construction
Cons
Best Uses
- swapping between equip
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Awesome product, easy to use. Been a real help when swapping my camera between different pieces of equipment.
- Was this a gift?:
- No
Pros
- Easy To Use
- Good Interface With Camcorder
- Improves Performance
- Lightweight
- Quality Construction
Cons
- Heavy
Best Uses
- Replacement
- Shooting Outdoors
- Travel
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Honestly, the more of these available the better, having multiple of these has made transitioning from glidecam, to tripod to shoulder rig, seemless and effortless. Best asset to have and I bought 3.
- Was this a gift?:
- No
Pros
- Easy To Use
- Fits 500 And 500plong
- Quality Construction
Cons
Best Uses
- Home Movies
- Makes Changing Gear Easy
- Travel
- Upgrade
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Use it on my Glidecam to quickly swap cam between manfrotto monopod / manfrotto tripod and Glidecam. Seems to work ok so far.
- Was this a gift?:
- No
Pros
- Easy To Use
- Good Interface With Camcorder
- Improves Performance
- Lightweight
- Quality Construction
Cons
Best Uses
- Shooting Indoors
- Shooting Outdoors
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
Works well with Manfrotto 500 head and quality build from as expected
- Was this a gift?:
- No
Pros
- Improves Performance
- Quality Construction
Cons
- Poor Interface
Best Uses
Comments about Manfrotto 577 Quick Release Adaptor w/501PL:
The quick release plate is a great idea, but it depends on what you are going to use it for.
I bought this to use with the Glidecam HD2000 but there are several problems you have to overcome to make it work.
Firstly the glidecam plate that the base of this attaches to, does not have holes big enough or spaced probably apart to attach enough screws to hold the plate securely in place. To get around this you need to make one of the holes on the glidecam plate bigger.
Secondly when you put the base plate on the bottom of a camera (such as my GH4 or Blackmagic Pocket) the plates lock to keep the camera in placce often hits the bottom of the camera, making it impossobly to lock the camera on to the release plate. There are a couple of options to work aorund that, such as taking the spring out of the lock.
If you are happy to make work arounds for these issues, the plate is solidly constructed and does sit nicely on my glidecam now.
- Was this a gift?:
- No
Displaying reviews 1-10
Previous | Next »
Do you have questions about this product?
Get your Product questions answered by real customers and our in-house experts with the Videoguys AnswerBox!In this area, please only post questions specific to the product, i.e. operations, features, functions etc..
If you have questions about product availability, pricing, ordering, delivery, or other service issues, please call (03) 9543-8885 or use our Contact Centre to submit an email request.
Q:
I'm getting a glidecam HD2000 and have a Canon 70D, is this compatible with both?? Thank youAsked on 29/1/2016 by Mazz1 answer
A:
Yes, that will suit both products just fine.Answered on 31/1/2016 by Sales Team from Videoguys
Q:
Hi there,
I have a miller DS-10 tripod and am wondering if this will mount onto that? Can I just screw this to the Miller plate?Asked on 9/9/2015 by Adam2 answers
A:
Yes you can use your existing camera plate to mount this adapter on top of your ds10 head.Answered on 9/9/2015 by Michael from VideoguysA:
Correct. It will attach to your tripod plate.Answered on 9/9/2015 by Sales Team from Videoguys
Q:
Does this come with the plate or just the adaptor?Asked on 7/9/2015 by Jared Tan from Sherwood, QLD1 answer
A:
It definitely includes the plate.Answered on 7/9/2015 by Sales Team from Videoguys
Q:
Can this system be mounted on a glidecam?Asked on 8/8/2015 by John from Gold Coast1 answer
A:
Yes! This is the standard optional accessories we have available with all our Glidecam's.Answered on 9/8/2015 by Michael from Videoguys
Q:
will a Manfrotto 502 quick release plate fit into the 577 adaptorAsked on 8/12/2014 by Du from Yeppoon1 answer
A:
It will, but not securely, since the plates are slightly different.Answered on 8/12/2014 by Michael from Videoguys
Q:
Are both the mounting screw and the plate screw 1/4"?Asked on 27/7/2013 by Dan from Perth, WA1 answer
A:
No.
Supplied with 1/4" and 3/8" camera fixing screws.Answered on 28/7/2013 by Michael from Videoguys
Q:
Will this base work with the 504PLONG plate? (The plate from the 504HD tripod head)?
I thought the 501PL and the 504PLONG plates were interchangeable (except for the length), but just wanted to check.Asked on 13/11/2012 by Tom from Newcastle, NSW1 answer
A:
No. the 504HD is completely different, the 501PL. You need to buy the
Manfrotto Sympla Fixed Quick Release Plate: MVA513W: http://www.videoguys.com.au/Shop/p/25802/manfrotto-sympla-fixed-quick-release-plate-mva513w.html?cat=685Answered on 13/11/2012 by Michael from Videoguys
Q:
Hi guys. Can I buy some more baseplates without the mounting plate? I need this product plus another two base plates.Asked on 11/11/2011 by Anonymous from Perth WA1 answer
A:
Ofcause.. see web link: http://www.videoguys.com.au/Shop/p/2239/manfrotto-501pl-camera-plate-501pl.htmlAnswered on 11/11/2011 by Michael from Videoguys
Q:
Is the plate in this set the same as the plate on the Manfrotto 701HDV pro fluid head?Asked on 17/8/2011 by Anonymous1 answer
A:
Yes, its the same plate. Its a 501PL Camera Plate.Answered on 17/8/2011 by Michael from Videoguys
Optional Accessories
You may also be interested in the following items:
Optional Accessories
You may also be interested in the following items:
