IsoAcoustics ISO-L8R200 Home and Studio Speaker Stands (Pair)

IsoAcoustics
Do you have a technical question about this Product?
VG # ISOISOL8R200 • MFR # ISO-L8R200
Product Availability
IN STOCK
Clearance Item

Ready to Order?

You Pay:
$229.00
Inc GST
SRP : $285.00 Inc GST
Instant Savings: $56.00

Customer Reviews:

Read what other customers have said about this item.
Main Features
  • Tough, durable construction
  • Isolates Speakers from surfaces for true sound
  • Isolators made of a high-modulus co-polymer

Fine-tune your sound the way it's meant to be heard

The IsoAcoustics ISO-L8R200 Speaker Stand Line-Up

IsoAcoustics offers two sizes of audio stand to fit your speakers. Each size is optimized to get the most from your particular speaker system.

Stands can be configured to 3" or 8" in height, with inserts that provide a variety of tilt-up and tilt-down adjustments. In the lowest configuration, the monitor can be tilted down to focus the tweeter to a height below the original supporting surface - providing superior isolation and sound improvement.

Choose your set-up:

ISO-L8R200 Short

In this case, the audio speaker stand is configured for 3" in height. Speaker can also be tilted for optimal listening angle. Usually speakers will be situated on a desktop or table.

ISO-L8R200 Long

Speaker stand is configured for 8" in height. Speaker can also be tilted up or down for exact listening angle. Can also be used for floor applications.

IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.

Height Adjustment

An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.

In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20" above the work surface. An enclosure containing an 8" speaker may position the high frequency driver 12" from the bottom while an enclosure with a 6" speaker may position the high frequency driver only 8" from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. This speaker stand configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6" off the floor and tilted up 8 degrees.

Tilt Adjustment

The tube lengths and end-caps combinations provide a simple means to establish optimal adjustment of large and small monitors over the typical 36 to 48 inch listening distance for mixing and evaluation.

Isolators

ISO-L8R200 speaker stands prevent the transfer of speaker cabinet energy to surrounding surfaces, effectively isolating the speaker from the desktop, bookshelf or other surface. By allowing the speaker to perform in free space, it's able to sound the way it was intended. The end result is a more accurate, satisfying sound, which makes mixing and listening a better experience.

Specifications

The only audio speaker stands that address the PIF Principles - the three elements affecting sound

    Placement: Proximity to adjacent and nearby surfaces. ISO-L8R200 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.
    Isolation: From supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.
    Focus: Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.

To ensure compatibility with your particular speakers, please visit the IsoAcoustics website for a constantly updated list.

REVIEW SNAPSHOT®

by PowerReviews
IsoAcoustics ISO-L8R200 Home and Studio Speaker Stands (Pair)
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

 
4.0

A unique product

By Michael

from Alice Springs

About Me Experienced

Verified Buyer

Pros

  • Many Height Options
  • Raises Tilts Monitor
  • Reduces Lf Resonance
  • Reduces Lf Resonances
  • Surprisingly High Quality
  • Versatile
  • Visually Attractive

Cons

    Best Uses

    • Amateur Recording
    • Home Studio
    • Professional Recording

    Comments about IsoAcoustics ISO-L8R200 Home and Studio Speaker Stands (Pair):

    I have large, 10kg monitors with 8" woofers that make everything vibrate. I needed to raise them above my other equipment, and tilt them down. These are very high quality with rubber at 16 contact points, two sets of risers for different heights, and inserts for three angles of tilt. A bit pricey but they do an exemplary job making my monitors sound even better.

    Comment on this reviewHelp Icon

    Displaying review 1

    Back to top

    Do you have questions about this product?

    Get your Product questions answered by real customers and our in-house experts with the Videoguys AnswerBox!

    In this area, please only post questions specific to the product, i.e. operations, features, functions etc..
    If you have questions about product availability, pricing, ordering, delivery, or other service issues, please call (03) 9543-8885 or use our Contact Centre to submit an email request.

    2 Questions | 2 Answers
    Displaying questions 1-2
    • Q:

      I have a pair of older JBL-L110 studio monitors. They are not a stingy speaker measuring 597mm high / 362mm wide / 286mm deep and weigh 23kgs each. I am hoping the L8R200 short would be suitable.
      Can you please confirm?
      my best regards
      Peter Sloss
      Asked on 3/2/2016 by Slossy

      1 answer

      • Staff Reviewer

        A:

        Hi Peter,

        There was no exact match on the IscAcoustics site to your model of speaker - however I found a slightly larger JBL speaker & the L8R200 was the listed match, so that seems like a safe choice.

        Answered on 3/2/2016 by Sales Team from Videoguys
    • Q:

      I am interested in the above speaker stands for my home audio system. My speaker dimensions are 210 x 170mm. Can you please advise on the length and width dimensions of this product so I knw if they will suitably hold my speakers. Also can you confirm if the tilt components come standard or not. Thanks
      Asked on 17/4/2013 by Reginald from Ballina, NSW

      1 answer

      • Staff Reviewer

        A:

        To ensure compatibility with your particular speakers, please visit the IsoAcoustics website for a constantly updated list. http://www.isoacoustics.com/files/chart.pdf

        Answered on 18/4/2013 by Michael from Videoguys
    Displaying questions 1-2

    Do you have a question about this product? 

    UPC: 627843157410
    IsoAcoustics ISO-L8R200 Home and Studio Speaker Stands (Pair)
    Phone: (03) 9543 8885 Fax: (03) 9543 8865
    |
    Address: Unit 12, 25 Howleys Road, Notting Hill Vic 3168
    Prices, specifications, and images are subject to change without notice. VideoGuys Australia is not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.
    No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.