Phone: (03) 9543 8885 Fax: (03) 9543 8865

Sony SMADP3D Dual Channel Multi Interface Shoes (MI Shoe) Adapter

VG # SONSMADP3D
 • 
MFR # SMADP3D
Sony
Product Availability

Main Features

  • For Dual Channel Operation
  • No need for separate XLR cable
  • Power can be supplied by camera

Ready to Order?

You Pay:
$111.00
Inc GST
SRP : $132.00 Inc GST
Instant Savings: $21.00

Dual channel Multi Interface Shoe (MI Shoe) adaptor for cable-free connection

The 2-channel wireless receiver URX-P03D can be attached to camcorders or interchangeable-lens cameras that have an MI (Multi-Interface) shoe using the 2-channel MI shoe adaptor SMAD-P3D. This eliminates the need for connecting cables. By using the MI shoe adaptor, audio signals can be transmitted from the wireless receiver to a camera. In addition, the wireless receiver can get power from the camera, and the camera can control power ON/OFF, unifying power management.

The SMAD-P3D is applicable to XDCAM Camcorder PXW-X70, PXW-X160, PXW-X180, PXW-X280, PXW-X200*, PXW-Z150**, PXW-FS7, PXW-FS5 and PXW-FS5K, NXCAM Camcorder HXR-NX100, HXR-MC2500, Handycam FDR-AX100 ***, NEX-VG900* ***, & NEX-VG30 ***, plus interchangeable lens digital camera α7* ***, α7R ***, α7S ***, α7 MarkⅡ ***, α7R MarkⅡ ***, α7S MarkⅡ ***, α99 ***, α6000***, α6300 ***, and Cyber-shot DSC-RX10 ***, (as of April 2016).

* PXW-X200 firmware should be upgraded to Ver.2.00 or later for using SMAD-P3D.

** When using with PMW-Z150 operated by AC power, please set a battery on the camera. Without a battery, the power supply function and power ON/OFF control function will not be available. In that case, insert new AA alkaline batteries in the receiver and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode to avoid an unexpected shutdown of the camera or data loss.

*** When using with these specific camera models, the power supply function and power ON/OFF control function will not be available. Insert new AA alkaline batteries in the receiver and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode to avoid unexpected shutdown of the camera or data loss.

No need for separate XLR cable

Using an MI Shoe connection, the 2-channel audio signal from wireless receiver URX-P03D can be input to the camera without XLR cables.

Power can be supplied by camera

Power can be switched on and off from the camera/camcorder.

UPC: 4548736036888
Customer Service:
(03) 9543 8885
Fax:
(03) 9543 8865
Prices, specifications, and images are subject to change without notice. VideoGuys Australia is not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.
No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.