Teradek Bolt 500 3G-SDI/HDMI Video Transceiver Set

Teradek
VG # TERTD100935 • MFR # TD-10-0935
Product Availability

Ready to Order?

You Pay:
$4,825.00
Inc GST

Customer Reviews:

Read what other customers have said about this item.
Ratings
 
0
0 reviews
Do you have a technical question about this Product?

The Teradek Bolt 500 Transceiver Set comes with one Transmitter and one Receiver.

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

 

Longer Range
Transmit visually lossless video up to 500ft with no delay.

20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates.

Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust Than Ever Before
Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.

2 x HDMI Type A to Type A 12in Cable
2 x SDI BNC to BNC 10in Cable

Transmitter
1 x 2-pin Lemo to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 10 inch
1 Year Warranty

Receiver
1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
1 x Lightstand Adapter (1/4"-20 inch)
1 x SDI (BNC to BNC) Cable 10 inch
1 x USB 3.0 Cable A to Micro B (3ft Length)
1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
1 x 1-Year Warranty

Video Compression

    • visually lossless

Test Pattern Generator Support

    • Custom output formatted test pattern over HDMI and SDI.

Color Correction

    • CDL/1024 1D LUT (supports 10-bit color)
    • 33x33x33 3D LUT (supports 10-bit color)

Audio Compression

    • 48kHz 24-bit PCM

Audio Input

    • Embedded Audio Input

Dimensions

    • 1.0" x 3.5" x 5.8" (25.2 x 88.9 x 146.5mm)

Weight

    • 10.5oz(299g)

Construction

    • Milled Aluminum(Chassis) and regulation-compliant PCB
    • Plastic Cap
Http

    • None

Configuration Interfaces

    • No OLED Screen
    • There is an OSD that appears on the Video Output which can be controlled with the Menu Joystick

Switches

    • On/Off and Reset Switch

Desktop App

    • Feature-rich Bolt Manager Application for OSX & Windows

Usb Interface Functionality

    • Upgrade via Mini-USB

Http

    • None

Configuration Interfaces

    • No OLED Screen
    • There is an OSD that appears on the Video Output which can be controlled with the Menu Joystick

Switches

    • On/Off and Reset Switch

Desktop App

    • Feature-rich Bolt Manager Application for OSX & Windows

Usb Interface Functionality

    • Upgrade via Mini-USB
Wireless

    • Non-DFS Frequencies:
    • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
    • EU & JP: 5.19 ~ 5.23 GHz
    • DFS Frequencies:
    • US: 5.27 ~ 5.55 GHz and 5.67 GHz
    • EU & JP: 5.27 ~ 5.67 GHz

Rf Channel Selection

    • Auto only (NOT configurable)

Encryption

    • AES-128

Rf Power

    • 15dBm EIRP

Range

    • Up to 500ft line of sight

Unicast Multicast

    • Unicast / Multicast

Noise Rejection

    • Can coexist with WiFi and 5GHz cordless phones
Power Input

    • 2-Pin Connector 7-28 VDC

Battery

    • None

Nominal Power Consumption

    • 9 Watts (Measured at 1080p60)

Operating Temperature

    • 0 ~ 40 deg-C
Mountability

    • Multiple mounting options with 1/4" holes

Teradek Bolt 500 3G-SDI/HDMI Video Transceiver Set
  • 2 x HDMI Type A to Type A 12in Cable
  • 2 x SDI BNC to BNC 10in Cable
  • Transmitter
  • 1 x 2-pin Lemo to PowerTap 18 inch Cable
  • 1 x Hot Shoe Adapter (1/4"-20 inch)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 Year Warranty
  • Receiver
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 x 1-Year Warranty
Phone: (03) 9543 8885 Fax: (03) 9543 8865
|
Address: Unit 12, 25 Howleys Road, Notting Hill Vic 3168
Prices, specifications, and images are subject to change without notice. VideoGuys Australia is not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.
No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.