Rode NT1 + AI1 Complete Studio Kit

Do you have a technical question about this Product?
VG # RODNT1AIKIT • MFR # NT1/AIKIT
Product Availability
New Item

Ready to Order?

You Pay:
$449.00
Inc GST
SRP : $499.00 Inc GST
Instant Savings: $50.00

Customer Reviews:

Read what other customers have said about this item.
Ratings
 
0
0 reviews
Main Features
  • Rode NT1 large diaphragm condenser microphone
  • 20 foot XLR Cable
  • Rode AI-1 Audio Interface
  • Rode SMR shock mount with popshield

RØDE’s AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The Rode NT1/AI Complete Studio Kit comes with the AI-1, RØDE’s peerless NT1 large diaphragm condenser microphone, a shock mount and all cables. Let’s get started.

As for inputs: the AI-1’s got both kinds…

The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.

No cords barred (and other puns)

The Complete Studio Kit comes with the RØDE NT1 studio condenser microphone, a shock mount, pop-shield [lose standmount], stand-mount, RØDE XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer, and power – including 48V phantom power to your AI-1.

Superior Headphone Amplifier onboard

Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

AI-1 Interface Specifications:

Computer Connectivity: USB
Form Factor: Desktop
Simultaneous I/O: 1 x 2
Number of Preamps: 1
Phantom Power: Yes
Bit Depth: 24-bit
Sample Rates: 44.1 kHz 48 kHz 88.2 kHz 96 kHz
Analog Inputs: 1 x Neutrik XLR-1/4” combo
Analog Outputs: 2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)
Direct Monitor: Yes
USB: 1 x USB Type C
Bus Powered: Yes
OS Requirements: Mac OS 10.10 or later Windows 7 or later
Power: USB bus-powered
Depth: 100mm total (with knobs) chassis: 88mm
Width: 124mm
Height: 38mm
Weight: 1lb 3.7oz 560g

Advanced Specifications

INPUT
XLR/MIC INPUT

Dynamic Range: 104dBu
Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted): –128dB-A
Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
Gain Range: 0dB – >45dB
Input Impedance: 1.3K Ohms

INSTRUMENT INPUT

Dynamic Range: 104dBu
Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
Gain Range: 0dB – >45dB
Input Impedance: 0.9M Ohms

OUTPUTS
MONITOR OUTPUTS

Maximum Output Level: -6dBu
Frequency Response: 20Hz – 20kHz better than ±1dB

HEADPHONE
Max output power at 1% THD: 32Ohms – >24mW 300Ohms – >245mW

NT1 Microphone Specifications:

Acoustic Principle: Pressure Gradient
Active Electronics:
JFET impedance converter with bipolar output buffer
Capsule:
1.00"
Polar Pattern:
Cardioid
Address Type:
Side
Frequency Range:
20Hz - 20kHz
Output Impedance:
100Ω
Maximum SPL:
132dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level:
8.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity:
-29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted):
4dB-A
Power Options:
+48V phantom power+24V phantom power
Weight:
440.00gm
Dimensions:
187.00mmH x 50.00mmW x 50.00mmD
Output:
XLR Output

UPC: 698813005123
Rode NT1 + AI1 Complete Studio Kit
  • Rode AI-1 Audio Interface
  • Rode NT1 large diaphragm condenser microphone
  • Rode SMR shock mount with popshield
  • 20 foot XLR Cable
  • USB C/A cables
Phone: (03) 9543 8885 Fax: (03) 9543 8865
|
Address: Unit 12, 25 Howleys Road, Notting Hill Vic 3168
Prices, specifications, and images are subject to change without notice. VideoGuys Australia is not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.
No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.