Using our online system to create a quotation which is valid for 14 days.
We developed a simple self service system that allows Government Departments, Educational institutes, and Corporate companies, to obtain a quick quotation request, by following these simple steps.
- To create an Online Quotation, add the product(s) you wish a quote on to your shopping cart as if you were placing an order.
- After adding all the items to your shopping cart click "View Shopping Cart"
- On the Shopping Cart Page, instead of selecting the "Proceed to Checkout" button, click the "Request a Quote" button instead. (see below example)
You will then be redirected to the Login Page (if you're not already logged in) and you will be asked to log into your account. (see below)
If you don't have an account you will then need to create one, at this step. We require this information to capture all your details, so we can provide you with accurate shipping costs, and also if we needed to discuss particulars of the request with you.
Once you have logged into or created your account, you will then be re-directed to the Quotations Submission Page where you can submit your quote request.
All the items in your cart will be visible on this page (see below). You can also add any comments to the request, and select what your preferred method of payment will be.
Once the quote has been submitted, a Quote ID will be applied to it, (Shown as QU-XXXXX) which you can reference in any correspondence with us. A Confirmation of the request will also be emailed to you.
Once received by us, we will review your request and return to you with our most competitive quote.
Please allow up to 24hrs for Processing.
You will get a follow-up e-mail (Subject will read: Your Quote, QU-XXXXX has been completed).
Once you review your quote, you can "Accept"it via logging into your Account Center or modifying it by calling us during business hours.
Tascam SS-CDR250N Two-Channel Networking CD and Media Recorder
AC Power Cord
The SS-CDR250N Two-Channel Networking CD and Media Recorder from Tascam is a solid-state recorder that features networking and can accept an optional IF-DA2 Dante card for integrating into any commercial environment.
It can be used in broadcast and contractor installation markets, and records in WAV, MP3, SD/SDHC/SDXC, USB memory, and CD application formats.
Built with parallel and RS-232C serial control, along with up to 20 tracks of flash start, the media recorder provides balanced and unbalanced I/O, and coaxial digital I/O.
These unique features make the SS-CDR250N Two-Channel Networking CD and Media Recorder an ideal one rack-space media solution.
Frequency Response 20 Hz - 20 kHz ±0.5 dB (JEITA) Signal to Noise Ratio 95 dB or more (JEITA) Dynamic Range 95 dB (JEITA) Distortion 0.005% or less (JEITA) Channel Crosstalk 95 dB (JEITA)
Supported Media SD (512 MB to 2 GB) SDHC (4 GB to 32 GB) SDXC (up to 128 GB) card USB memory (512 MB to 64 GB) CD-R, CD-R-DA, CD-RW, CD-RW-DA Recording Formats WAV: Stereo/Mono, 44.1/48/96 kHz, 16/24-bit MP3: Stereo/Mono, 44.1/48 kHz, 64 to 320 kbps CD-DA: Stereo, 44.1 kHz Playback Formats WAV: Stereo/Mono, 44.1/48/96 kHz, 16/24-bit MP3: Stereo/Mono, 44.1/48 kHz, 64 to 320 kbps CD-DA: Stereo, 44.1 kHz Number of Channels 2 mono, 1 stereo
Connector Balanced: 3-pin XLR (1: GND, 2: HOT, 3: COLD) Standard Input Level +4 dBu (1.23 Vrms) Maximum Input Level +20 dBu (7.75 Vrms) Minimum Input Level -10 dBu (0.25 Vrms) or more Input Impedance 22 kOhms Connector Unbalanced: RCA pin jacks Standard Input Level -10 dBV (0.316 Vrms) Maximum Input Level +6 dBV (2.0 Vrms) Minimum Input Level -24 dBV (0.06 Vrms) or more Input Impedance 22 kOhms
RS-232C Connector: D-sub 9-pin Protocol RS-232C Parallel Connector: D-sub 25-pin Maximum Input Voltage +5.5 V Minimum Input Voltage High Level: +3.75 V Maximum Input Voltage Low Level: +1.25 V Output Format Open drain (withstand voltage 50 V, maximum 50 mA) Maximum Output Voltage Low Level: 0.5 V Power +5 V Power Maximum Current: 100 mA
Remote In (RC-SS2)
Connector 1.8" (3.5 mm) TRS jack
Connector Sub-mini 2.5 mm TRS jack (for RC-20 and RC-3F)
Connector RJ-45 (100Base-TX)
Connector USB A-type 4-pin Protocol USB 2.0 high-speed (480 Mbps)
Power & Other Parameters
Voltage 100 to 240 VAC, 50/60 Hz Power Consumption 100 V: 20 W, 110 V to 240 V: 23 W Operating Temperature Range 41 to 95°F (5 to 35°C) Dimensions (W x H x D) 19.0 x 1.8 x 11.9" (482.6 x 44.5 x 301 mm) Weight 6.4 lb (2.9 kg)
Prices, specifications, and images are subject to change without notice. VideoGuys Australia is not responsible for typographical or illustrative errors.
Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.
No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way
or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.