Print Page | Close Window |
|
|||||
|
|||||
The RDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument mic'ing, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required. The RØDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument mic'ing, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required. The NT6 utilises the 1/2" (externally biased) gold sputtered true condenser transducer used in the internationally renowned RØDE NT5. The capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. To further increase the versatility of the NT6, it is supplied with 2 thread adaptors - 1/4" to 5/8" and 1/4" to 3/8" that enable the capsule assembly to be securely attached to a wide variety of mic stands, tripods and boom poles. The capsule is connected to the pre-amplifier (body) by a custom 3 m Kevlar® fibre reinforced cable. Housed within the heavy duty satin-nickel-plated body, is a state-of-the-art low noise balanced output preamplifier, exhibiting a wide dynamic range and full frequency response. The surface-mount pre-amplifier circuit also incorporates a 2-position variable pad: 0 dB an -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80 Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position. The NT6 is intended for Film, Television, Broadcast, Live Performance, Theatre, Television, Surround and Environmental recording applications or wherever your imagination takes you. The NT6 is produced in RØDE's design and manufacturing facility in Sydney, Australia. Utilising state of the art computer controlled machining and assembly technologies, RØDE is able to achieve levels of finish and repeatability of the most exacting standards and tolerances. The NT6 comes supplied with Microphone Preamp (Body), Capsule, 3 m Kevlar® fibre reinforced cable, RM5 Stand Mount, 2-axis Swivel Mount, 2 thread adaptors, ZP1 Zip Pouch and WS5 Wind Shield and is coverd by a full 2 years parts an labour guarantee. |
|||||
Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein. VIDEOGUYS - referenced herein is a registered trademark. © 2024 Videoguys Australia All |