The Nexto DI NVS1501 Video Storage provides the digital pro with Installed 1TB SSD Drive of instant data storage - ideal for on location work. The NVS1501 features SD/SDHC/MMC/SDXC, CF/MD and Memory Stick/MS Pro-HG/MS Pro MagicGate slots for direct transfer from your card.

In addition to storing important files, freeing up your memory cards for more shooting, the NVS1501 also allows you to copy your files onto other devices, such as USB drives or memory cards, using an external card reader or the optional Ikegami GFPAK. Data can be copied to external hard drives as well using the appropriate connection. Data can additionally be burned to Blu-ray Disc using the NVS1501.

Nexto DI gave this device safety features as well; such as shock protection, in the form of a built-in free-fall sensor and rubber bumpers. Bad sector recovery is another feature that will ensure your peace of mind, by recovering data from bad sectors on moving it a safe sector. When it comes to powering the NVS1501 various methods can be employed. The internal battery can be recharged via the FireWire 800 cable, USB cable, or AC adapter, or the 'AA' battery holder can provide power, among other options.

Features

Back Up from Various Memory Cards: Offload data from various memory cards (CF, Microdrive, SDHC, SDXC, MS) up to 256Gb

Supports SDXC: The NVS1501 supports the exFAT file system used in SDXC. (Support for file sizes larger than 4GB will be available in the future via a free firmware upgrade)

Fast Copy: Make a new folder and copy all the memory card data into the folder

Copy and Verify: Same as Fast Copy, but after copying, the data on the memory card is compared with the copied data on the NVS1501 hard drive. Each bit is verified

Safe Copy: Before copying data, the NVS1501 verifies that its hard drive area is safe. If a bad sector is detected, a new, safe area is found - then copying (Fast Copy) will begin

CF: 80MB/s, 6 minutes, 40 seconds

SDHC/SDXC: 22MB/s, 24 minutes, 14 seconds

SDHC/SDXC, UHS-1: 60MB/s, 8 minutes, 53 seconds

MS: 12MB/s, 44 minutes, 26 seconds

Preview Video and Photo Clip: User can preview video and photo clips with the built-in color LCD. A preview of both files on internal HDD and external device (CF, SDHC, SDXC, MS, USB external HDD) is supported

User can generate a second copy onto an external USB HDD. Export internal data to an external USB hard drive without needing a laptop. Each time you plug in an external USB hard drive to the NVS1501, any files recorded since the last sync will be transferred

The wall power adapter should be connected to both the NVS1501 and the USB external hard drive. Supports copy from USB card reader or GFPAK using USB host connectivity through eSATA/USB combo port

Multi-Copy Onto Two Separate HDD at the Same Time: MCopy (Multi-Copy) enables mirrored data to be copied onto the NVS1501 and an external USB HDD at the same time, to achieve maximum data safety

Bad Sector Recovery: If a video folder contains a bad sector the NVS1501 recovers the video folder. It copies data onto good sectors and replaces unusable sectors with a format dependent on dummy sectors. The frames that contain dummy sectors block noises but the rest of frames become usable

Success (or Failure) Feedback: Next time you switch on the NVS1501, it will display the previous backup result, in order to help the user to determine the deletion of data stored on the memory card

Supports high-speed data transfer to NLE system: IEEE1394b (FireWire 800): 75MB/s, 7 minutes, 10 seconds, USB 2.0: 33MB/s, 16 minutes, 17 seconds

Versatile Power Options: Its built-in internal battery makes the NVS1501 the perfect companion for working in the field. The NVS1501 can also be powered by the power adapter, interface cables, a 'AA' battery holder, or external battery

Burning a Blu-Ray Disc: The NVS1501 supports the burning or preview of Blu-Ray Discs without the use of a computer. Only the BD-R or BD-RE is supported. There is no support for burning a CD or DVD

Charging Time: Approximately 5 hours via power adapter / FireWire 800, Approximately 9 hours via interface cable,
Approximately 10 hours via 'AA' battery holder