The AirAV/Hollyland 3000AU is the ideal zero-delay wireless camera link system for broadcast & event production over extended distances. The Ultra-sensitive receiver in the 3000AU is built right into the high-gain antenna panel keeping RF cable losses to essentially zero, maximising signal-to-noise ratio. Fully RCM compliant with Australia/NZ specific firmware. Lowest noise/Auto-channel selection.

The 3000AU utilises today's most advanced wireless transmission technology. Supports HDMI and SDI on both Transmitter and Receiver (SDI loop-thru on Tx and 2 x SDI Out PLUS concurrent HDMI output on Rx). Transmission distance is rated for up to 750+ metres - Up to 2500+ metres when used in conjunction with the optional ANT50016dual Range-extender Tx antenna panel. Wide operating voltage of 7-36vdc makes them ideal for use from small handycam situations right through to professional Cinema Video Assist operations. Includes 240VAC Power Adaptor for Rx unit, D-Tap to DC Cables and protective Storm Case.

Transmitter:

The 3000AU Transmitter features a sturdy, CAD-designed case to enhance the look and operation of the system.

It also features auto-selection of either SDI and HDMI inputs. In situations where both signal types are connected to the transmitter, the SDI input will take priority. Designed to be used in conjunction with the AirAV 3000AU Zero-Delay HD Receiver to create an easy-to-setup High Quality HD camera link System. The AirAV 3000AU Link system is capable of 3000+ metres depending on antenna configurations.

Selection of operating frequency is extremely simple and straightforward. A visual confirmation that valid video is being received from the camera or other source is also provided.

The transmitter can operate from a wide ranging voltage supply of anywhere between 6 and 36 volts. Power can be supplied via a '970-style battery or via an external supply to the 4-pin Lemo power connector. A D-Tap to Lemo power cable is supplied with the unit.

AirAV 3000AU Transmitter Features:

• Auto-selecting 3G/HD/SD-SDI or HDMI input
• SDI Input Specifications:
  3G, HD, and SD-SDI (auto-selected) with loop-thru
  SMPTE-259/274/292/296/372/424/425
• HDMI Input Specifications:
  SD, HD, 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60
• Zero frame delay, no compression
• AES-128 encryption of HD video data and audio stream
• Supports point-to-point and point-to-multi point topology
• Easy to read indicators for operating Channel, Power and Video Input status.

Receiver:

The 3000AU Receiver is integrated directly into a high-gain directional antenna system providing the exceptional performance as well as rejection of potentially interferring signals off the side and back of the antenna panel. The entire system is extremely robust and designed to sit atop a standard, lightweight lighting tripod (not supplied). A storm case is also provided to enhance the transport of the system as well as affording you serious protection of your Link investment when not in use.

It also features simultaneous SDI (x2) and HDMI outputs. Designed to be used in conjunction with the AirAV 3000AU HD Transmitter to create an easy-to-setup High Quality HD camera link System. The AirAV 3000AU system is capable of 3000+ metres depending on antenna configurations.

Selection of operating frequency is extremely simple. Easy-to-read visual confirmation is also provided that indicates that the link system is "up", that there is a valid video signal being received from the transmitter, as well as an on-receiver RSSI (received signal strength indicator) are also provided.

The AirAV 3000AU Receiver can operate from a wide ranging voltage supply of anywhere between 6 and 36 volts. Power can be supplied standard V-Lock battery or via an external supply to the 4-pin Lemo power connector. A D-Tap to Lemo power cable is supplied with the unit.

AirAV 3000AU Receiver Features:

• High Quality, Zero-Delay Video Link Receiver
• SDI Output Specifications:
  3G, HD, and SD-SDI (auto-selected based on input to Transmitter) x 2
  SMPTE-259/274/292/296/372/424/425
• HDMI Input Specifications (auto-selected based on input to Transmitter):
  SD, HD, 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60
• Zero frame delay, no compression
• Supports point-to-point and point-to-multi point topology
• Easy to read indicators for Power, Link Status and RSSI.