Print Page | Close Window
Videoguys Australia Pty Ltd
ABN: 52 086 380 403
Unit 12, 25 Howleys Road
Notting Hill Vic 3168
Ph:(03) 9543 8885 Fax:(03) 9543 8865

Website: https://www.videoguys.com.au

Nanlite PavoTube 15C RGBW LED Tube with Internal Battery 2 Light Kit (0.6m)
Nanlite PavoTube 15C RGBW LED Tube with Internal Battery 2 Light Kit (0.6m)
Product Discontinued

SKU: NNPAV15C2KIT

You Pay: $630.00
SRP: $713.00
Instant Savings: $83.00 (12%)


The PavoTube 15C 2' RGBW LED Tube with Internal Battery from NanLite is ideal for hiding unobtrusively in small areas on a set or for shooting in vehicles such as cars, boats, or planes. The light even has octagonal ends that allow placement on the floor or other surfaces at a specific angle.

Let your creativity run wild with these LED tubes. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.

At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you're using, making it easy to fine-tune and then recreate them in future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.

This light's master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects. Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter and also has two built-in 2200mAH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall.

The Pavotube has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the throw of the lighting. Both 2-foot and 4-foot variants are available as single lights as well as kits of two lights and four lights.