The Zeapon EasyLock 2 is designed for a few purposes. It can be used as a stand for the Zeapon Micro 2 Micro Rail Slider, (sold separately), in order to support the slider on desktop and ground surfaces. Or it can be used as a low-profile desktop/ground support for your camera alone, in place of something like a mini tripod or a low hat. In either case, its tiltable feet can be adjusted to compensate for slightly uneven surfaces. Also, the EasyLock provides a convenient way of moving the slider or the camera from a tripod directly to a desktop/ground surface. Included with the EasyLock is an Arca-Swiss compatible quick release plate that makes tripod mounting even more convenient. An Allen key-type wrench for the plate is supplied that comes fixed hidden on the bottom of the EasyLock. When the EasyLock is used with the slider, a ball head (sold separately) can be mounted on top of the slider to support a camera. When the EasyLock is used with a camera only, a ball head (sold separately) can be used to support the camera. The EasyLock has a weight capacity of 15kg.

The EasyLock features four legs that can be set as wide apart as you need for different surfaces, and the feet are tiltable. The legs are also foldable. They tuck completely under the mounting surface so that the EasyLock can be packed away very compact. The mounting platform is about 8" in length. When the EasyLock is used with the Micro 2 slider, which is 13" in length, it provides secure support since it has a relatively large platform. The Micro 2 slider doesn't have legs/feet of its own because it's an extendable slider with a dual-slide design without room for legs, so the EasyLock provides the only way of using it on desktop and ground surfaces.

The EasyLock and a 1/4"-20 to 3/8"-16 adapter is included for converting the EasyLock screw to 3/8"-16 in order to support 3/8"-16-mount tripod heads and other support gear.

Perfect With The Micro 2 Rail Sliders

Achieve low-angle shooting while maintaining the Micro 2's double sliding distance.

See The World From A Lower-Angle

Making dull scenes fresher and more vivid.

Dual positioning for a tight connection

By positioning beans and double set screws for a tighter fit of the two.

Locking Screw

Unscrew the locking screw and open the supporting leg to easily take out the quick-release board.

Hidden Wrench

The hidden wrench solves the problem of having to bring adjusting tools with you as with some older products. Use it to adjust the 4 double set screws on the quick-release plate.

Foldable Support Legs

Extend the legs when in use and fold them away afterwards. Increasing the amount of space saved while remaining convenient to carry around.

Perfect Compatibility

The quick-release board is perfectly compatible with almost all quick-release boards on the market.

Different modes

Head Connection Mode - You can shoot from multiple angles as if the camera was supported by your arm.

Pod Connection Mode - Quick switching between the Low Profile Mount and the pod using a quick-release plate.

Floor Mode - Achieve lower-angle shooting while maintaining a double sliding distance.