SmallRig Battery Back 1547 allows mounting of Anton Bauer QRC, Switronix, RED, Blueshape ect. It mounts to standard 15mm rods with 15mm rod clamp(60mm apart). All necessary screws and spanners are included.

SmallRig ARRI Locating Handle HTR2640 is designed to attach to cage or camera rig via standard ARRI 3/8“-16 screw and provide multiple accessory mounts for cameramen. Featuring multiple 1/4"-20, 3/8”-16 and ARRI 3/8”-16 threads for accessories such as Monitor Mount BSE2294 and BSE2348. Integrates with two cold shoe mounts, with one of which is designed with an anti-removal pin allows mounting mic and light. The front of the handle features two m4 threads for rod clamp 1995 for EVF mount. The handle can be attached for both horizontal and vertical direction.

Work With Select Cages/Supports Features ARRI 3/8”-16 Locating Hole

SmallRig Cage for Sony A7 III A7R III CCS2645 features a brand-new appearance of the dark olive finish. It mounts to the camera using a 1/4”-20 screw on the bottom and s second M2.5 lock on the side, with rubber pads on the base plate preventing scratches. It comes with a variety of mounting options including 1/4’’-20 and 3/8’’-16 holes, ARRI locating holes and a cold shoe, which makes it easy to mount different camera accessories. For example, attach SmallRig Top Handle HTR2640 or Side Handle HSS2642 for better hand-held shooting. An included screwdriver is designed to tighten or detach the screws both at the bottom and side. The cage maintains full access to the camera’s controls, ports and battery.

Work With Sony A7 III/A7R III

SmallRig Wood Side Handle with ARRI-Style Mount HSS2642 is designed to provide a comfortable grip for increased stabilization and accessory mounts for cameramen. The handle attaches to the cage or camera rig via an ARRI 3/8“-16 screw with two locating pins. The handle can be configured for right or left Hand by detaching the metal connector. Featuring 3/8”-16, 1/4“-20 and cold shoe accessory mounts on top to add a mounting arm, light, mic or other accessories. The screws attach to a sliding mechanism that allows you to slide the handle up and down for your preferred position. A built-in Allen wrench inside the bottom allows to adjust the handle position and for further security. The smooth wood handle provides a solid, comfortable grip and it also works well in the situation of low temperature.

Work With Any camera cage/plate features ARRI 3/8”-16 threads on sides.

SmallRig Cage with Sun Hood for SmallHD FOCUS 5" HDMI/SDI Monitors CMS2641 is designed to provide all-around protection and accessory mounts for a monitor. The cage secures to the monitor via a 1/4”-20 screw on the top and bottom. Multiple 1/4’’-20 and Arri 3/8’’-16 threads are provided for an accessory such as Magic Arm 2070 and 2115. The bottom features a NATO rail for NATO clamp compatible accessories to quickly release your setup, such as Monitor Mount BSE2348. Dedicated sun hood is included to provide glare protection when shooting outdoor. Optional HDMI/SDI Cable Clamp BSC2333 are sold separately to secure the cable. The right side features a 1/4”-20 threaded hole with two locating holes allows for attaching the original SmallHD Tilt Arm for angle adjusting.

Compatible with: SmallHD FOCUS 5”HDMI Monitor, SmallHD FOCUS 5”SDI Monitor

There is an inner M12 thread on each end of a rod so that you can e*tend the rod with an M12 threaded rod.