SmallRig Cheese Bar with 1/4 Inch and 3/8 Inch Screw Hole 1091 is equipped with industry-standard 1/4"-20 and 3/8"-16 threaded holes, which make it possible to mount on any 1/4"-20 and 3/8"-16 accessories. You can also mount it onto Red camera or Red Rig because it comes with the RED screw spacing.

SmallRig 1598 Mounting Cheese Plate - This easy plate is equipped with 1/4''-20 and 3/8"-16 threaded holes in standard spacing (9mm center to center). It can be mounted on SmallRig railblocks, dovetails and short rods. It works as a switching plate when attached to the bottom of a Dslr cage.

SmallRig Swivel and Tilt Adjustable Monitor Mount with Screws Mount 2904 is designed to hold your monitor onto the camera cage or other mounting system via two captive 1/4“-20 screws. It features 1/4”-20 screw on the top for monitor, light, or microphone. The holder enables to swivel 360° sideways and tilts 170° with a free stop in any position. The tightness of each axis is adjustable via the Allen wrench. The robust mount is CNC-Machined Aluminum and can support 5” and 7” monitor up to 1.5kg. The swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further secure. Besides, the bottom comes with two 1/4”-20 threaded holes for more DIY options.

Work With

SmallHD Focus Series

SmallHD Focus OLED Series

SmallHD UltraBright Series

SmallHD 500 Series, 700 Series

Atomos Ninja Series

Atomos Shogun Flame

Blackmagic Video Assist 5” 

Blackmagic Video Assist 4K 7”

Other accessories weights less than 1.5kg

Note：Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.

The PK1 Pro MKII is an incredibly well thought out stand for your ATEM Mini Video Mixer for Live Production and Live Streaming by Aaron Parecki

The stand raises the ATEM mini off the desk to help keep it cool and make it easier to use and features excellent cable management. Additionally, you can place an extra ATEM mini or Streamdeck XL deck in front of it, thanks to the raised position of the stand.

It features cold shoes on the top cross bar allowing you to attach microphone receivers and other cold shoe accessories (total of 4 cold shoes). On the sides, you can attach cheese plates for mounting even more accessories, such as an SSD drive for storage.