The silver Master C-Stand with 20" Riser and Sliding Leg Kit from Kupo is essential on set for everything from holding flags and reflectors to mounting lights. The kit contains a Master C-Stand with a single leg that's height adjustable for uneven terrain. A 2-1/2" removable grip head with a large T-handle is included, as is a 20" grip arm with a permanently attached 2-1/2" grip head. The arm has a hex attachment at its end to prevent light fixtures from twisting when mounted.

The Master C-Stand with Turtle Base from Kupo is a 20" Century Stand designed to support light fixtures and modifiers weighing up to 10kg. Additionally, the stand has been given a black finish achieved by applying a black powder coating to the metal frame.

Constructed with both strength and capability in mind, the Master C-Stand features three sections—two of which are extendable—which bring the stand's maximum height to 1.72m. At its lowest, the stand collapses down to just 0.92m and is capable of supporting up to 10kg at either height.

The stand's base is made up of a traditional three-leg configuration with each leg set at a different height to allow for stand "nesting" on set. Of the three legs, two feature a spring-loaded design that rapidly extends and locks them into place, while the third Maybe height-adjusted via a locking knob on the riser's main section. In order to improve strength, the base has been cast from durable zinc alloy, making it five times stronger than traditional aluminium designs. The locking collars have also been cast from aluminium in order to prevent damage and maintain longevity.

Often paired with a C-Stand, the black 20" Hex Grip Arm from Kupo has a 5/8" hex pin at one end of a 20" textured, non-slip steel tube and a 2-1/2" grip head at the other. The hex pin has 6 milled flat surfaces so that you can attach a light to it without it turning and use the arm like a mini-boom. The grip head has a pair of rotating discs attached to a 5/8" receiver. The discs have 4 V-shaped jaws to accept 5/8", 1/2", 3/8" or 1/4" accessories like flags, scrims or even another grip arm. The jaws are locked down by an oversized, ergonomic T-handle.

The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roller bearings for maximum torque, and a non-slip aluminium friction disc. This durable grip head is made of aluminium and steel and has a black powder-coated finish.