Print Page | Close Window

Videoguys Australia Pty Ltd
ABN: 52 086 380 403
Unit 12, 25 Howleys Road
Notting Hill Vic 3168
Ph:(03) 9543 8885 Fax:(03) 9543 8865

Website: https://www.videoguys.com.au

Magewell USB Capture SDI Plus, One-Channel 2K Capture Device
	SKU: 320500000 You Pay: $807.00

The Magewell USB Capture SDI Plus is a one-channel 2K capture device that interfaces with your computer via USB 3.0.

Special Notice

Please use the included Magewell USB 3.0 cable, which is a custom accessory. Using any other similar cable might cause capture problems and even damage the capture device.

The Magewell USB Capture SDI Plus is a one-channel 2K capture device that interfaces with your computer via USB 3.0. It features loop-through BNC input/output that allows you to see your video on a downstream device, while you are capturing it into your computer. It also has a line-in audio input, for capturing audio directly, without picture, or you can de-embed the audio from the SDI stream.

Video Processing

Video processing pipelines with 160MP processing bandwidth
Video cropping
Video scaling
Video de-interlacing
Weave
Blend top & bottom field
Top field only
Bottom field only
Video aspect-ratio conversion
Auto or manual selection of input aspect ratio
Auto or manual selection of capture aspect ratio
Three aspect-ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)
Video colour-format conversion
Auto or manual selection of input colour format & quantization range
Auto or manual selection of capture colour format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709 colour formats
Support for Limited or Full quantization range
Support for Limited, Full & 'Extended gamut' saturation range
Video frame-rate conversion
Vertical flip and mirror

Multiple Devices on One Computer

Support for connecting multiple USB devices to one system
Support for setting the device serial number as the device name shown in the system using USB Capture Utility

SDK

The USB Capture SDK provides functions including signal status extraction and capture configuration

LED Indicator

Status LEDs indicate the working state of each channel:

Pulsing slowly: idle
On: input signal locked
Off: input signal unlocked
Double blinks: memory failed or FPGA configuration failed

Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.
VIDEOGUYS - referenced herein is a registered trademark.
© 2024 Videoguys Australia All