This black KY-PZ100 Robotic PTZ Network Video Production Camera from JVC can be used as a single camera or part of a multi-camera shoot. It features a 1/2.8" sensor and captures 1080i/p and 720p footage to a MicroSDHC/SDXC card slot (microSD card not included). The PTZ camera features 3G-SDI and HDMI outputs and can simultaneously output video while streaming over its Ethernet port or an optional USB Wi-Fi adapter or LTE modem.

The KY-PZ100 supports RS-232C, RS-422 control signals and IP control via its RJ45 connector (Ethernet port). You can program over 100 presets and positions into the camera, which enables you to pre-plan your show. The camera can be mounted on either a tripod or ceiling and with its POE capability, you don't need to worry about running an AC power cord.

Wireless Streaming

• The camera features a built-in USB host that allows you to attach a USB Wi-Fi or LTE adapter and stream
• The camera supports streaming with SMPTE 2022 forward error correction
• Advanced Zixi reliable communication with ARQ, FEC, and adaptive bitrate control
• Low-latency streaming
• 1/2.8" CMOS sensor (2.2 million pixels)
• 30x optical zoom ratio (4.3-129mm, f/1.6 to 4.7)
• Fast f/1.6-4.7 maximum aperture for excellent low light
• LoLux mode (down to 0.01 lux)
• Robotic pan, tilt, and zoom
• Full HD 1080p, 1080i, 720p video
• 3G-SDI and HDMI digital outputs
• 2-channel audio (or 1 channel balanced audio with phantom power)
• USB host connection for Wi-Fi or 4G LTE adapter
• LAN connector supports Power over Ethernet
• MicroSDHC/SDXC memory card recording
• Remote control via RS-232C / RS-422, or via IP controller
• Can memorize over 100 preset settings and positions
• Can be mounted upside-down or right-side-up