Print Page | Close Window |
|
|||||
|
|||||
The Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload the meters at the board and cause audio distortion. The Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload the meters at the board and cause audio distortion. The ATT-448 attenuator is placed in-line between the microphone and the board, and you can switch on the appropriate amount of attenuation. The choices are 20, 30, or 40 dB of signal reduction, for a wide range of uses on stage and in the studio. The unit accepts 3-pin male and female XLR connectors. Provides 20, 30, or 40 dB of microphone attenuation
For use with all low-impedance and phantom-powered condenser microphones
XLR input and output
Magnetically shielded case
|
|||||
Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein. VIDEOGUYS - referenced herein is a registered trademark. © 2024 Videoguys Australia All |