Accsoon's TopRig S60 Motorised Camera Slider boasts a smooth start/stop mechanism and brushless motor system that lets you accomplish stable, fluid panning shots from a distance. The S60 has a 4kg horizontal load capacity and a 42.5cm total travel distance. Onboard controls allow you to change modes and speed and set A/B points. The slider can be controlled remotely by pairing it with an iOS or Android app and your phone via Bluetooth. An NP-F battery or a DC power source can power the slider.

The S60 is appropriate for camera setups using telephoto or macro probe lenses due to its strong brushless motor and smooth start/stop movements. The S60 will keep your footage steady even near your subject.

The S60's overall speed range of 0.1 to 5cm/s allows it to move the camera at a speed that works best for your production. It uses an S-curve acceleration and deceleration to maintain a steady and smooth shot regardless of your camera's travel speed. You can adjust the speed by turning the onboard knob as needed.

Because of its guide wheel design, the S60 can be mounted on tripod legs of your choosing in various slanted orientations, horizontally and vertically, up to 90°. The slider can accommodate lower loads of up to 2.5kg in vertical mode.

To utilise Bluetooth to control your S60, download the TopRig app (Apple or Andriod). Adjust the slider's calibration, choose your A/B points, switch between loop modes, and specify additional parameters. The app also can switch between time-lapse and video shooting with a camera control cable that is sold separately.

When positioned horizontally, an integrated NP-F battery plate can power the S60 for up to 60 hours. Another power source is available without changing out batteries with a DC input. A 5V USB-C output port on the S40 allows you to charge your phone or power camera accessories.