Phone: (03) 9543 8885 Fax: (03) 9543 8865

ikan EC1 Beholder 3-Axis Gimbal Kit with Dual-Grip Handle

VG # IKAIKA01483
 • 
MFR # IKA01483
Product Availability

Main Features

  • 3-Axis Handheld Gimbal Stabilizer with 360 Degree Rotating Motors
  • Designed for DSLR & Mirrorless Cameras up to 5 lbs.
  • Stabilized with a 32-Bit Controller and a 12-Bit Encoder System
  • Adaptive PID Algorithm Produces Reliable Stability and Efficient Battery Life
Show more
Top Seller

Ready to Order?

You Pay:
$1,441.00
Inc GST

What's in the Box

ikan EC1 Beholder 3-Axis Gimbal Kit with Dual-Grip Handle
  • EC1
  • 1x Battery Cap With 3/8-16 Mount (Pre-Assembled)
  • 1x Battery Holder
  • 1x EC1 Gimbal Stabilizier
  • 1x Instruction Manual
  • 1x Micro USB AC Adapter
  • 1x Quick Release Plate (Pre-Assembled)
  • 1x Travel Case
  • 1x Travel Case Strap
  • 3x 18650 Batteries
  • 1x 1/4"-20 Camera Screw (Pre-Assembled)
  • DGH
  • 1x 1/4"-20 D-Ring Screw (Pre-Assembled)
  • 1x Gimbal Crossbar
  • 2x Gimbal Crossbar Feet
  • 2x Rubber Grip Handles
  • 1 x 3/8"-16 to 1/4"-20 Adapter (Pre-Assembled)
  • 4 x 1/4"-20 Flat 5/32 Socket Cap Screws
  • 1x 5/32 Hex Key

The ikan Gimbal Kit includes the EC1 Beholder 3-axis gimbal stabilizer with encoders and a dual-grip gimbal handle. The EC1 gimbal is a 3-axis handheld camera stabilizer designed for medium to small DSLR and mirrorless cameras weighing up to 4.5 lb. The gimbal features three 360° rotating brushless motors to stabilize movement on tilt-and-roll axes and provide smooth image capture while shooting handheld, while walking, or in any situation in which the camera is moving. The 3/8"-16 thread mount at the bottom of the gimbal handle allows you to securely mount the EC1 Beholder to a tripod, jib, or the included dual-grip handle support system.

Constructed of durable, lightweight aluminum, the dual-grip handle is specifically designed to control the Beholder gimbal with ease. It increases the stability and offers over-handed or under-handed gimbal operation modes. The built-in tabletop feet allow you to easily calibrate your gimbal hands-free and provide a firm base to set it on when not in use.



360 Motors

The 3-Axis gimbal features three 360 degree rotating brushless motors that give you a limitless range of motion.
Designed for DSLR & Mirrorless Cameras

With a payload of up to 5 lbs., the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras.

Sony a6300, Sony a7SII, Panasonic GH4, and the Canon 5D Mark III are just a few cameras that the EC1 can handle.

Canon Sony
Advanced Stabilization

Using a 32-blt controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer.

Lock Mode
In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.

Point & Lock
Quickly lock your camera into any position by manually pointing and holding It In any direction. After a few seconds, the camera will lock and hold its position until It Is reset back to default.

Auto Inversion
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.


Multiple Follow Modes
The EC1 features 3 different follow modes. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. In Pitch and Yaw-Axis Follow Mode, the EC1 will follow your Pan and Tilt Movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt, and Roll.

Follow Modes
OLED Status Display

A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.
OLED

Easy to Use
With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools.
Multiple Mounting Options

The EC1 handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to secur9ly mount the EC1 to a tripod, jib, or dual handle support system such as the lkan DGH.

UPC: 847983019670
Customer Service:
(03) 9543 8885
Fax:
(03) 9543 8865

Follow Us on Social Media

Prices, specifications, and images are subject to change without notice. VideoGuys Australia is not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.
No permission is granted for the use of materials, information, text or graphics, and/or to hyperlink other Web Sites with this Web Site, or to use the materials on your Web Site in any way or for any reason without prior specific authorisation from Videoguys Australia. Videoguys Australia reserves all rights not expressly granted herein.